Scale Calibration Procedure (lbs. or kg) with Remote Display*

4. Reinstall the platter onto the scanner/Diva scale.

Figure 44. Install Platter

5.Go to Group 1 Step 8 (Weight Unit) of the Service Mode by pressing the Zero ( ) key several times until ‘Group 1 Step 8’ is displayed on the Remote Scale Display screen (see Figure 45 below).

xDepending on the current Weight Unit setting, this value will either be 1, 2, 3, or 4.

Figure 45. Remote Scale Display Group 1 Step 8 example shown

6.Verify the weight unit setting. Verify the Group 1 Step 8 setting using the table shown below. Press the Zero ( ) key if correct. If the lb (Pounds) or kg (Kilograms) basic range setting needs to be changed, press the Tare ( ) key to scroll through the selectable options. Press the Zero ( ) key to accept the selected weight unit range.

Group 1 Step 8 (x) Selectable Weight Unit Ranges

1lbs range (0 to 30 lbs) **

2kg range (0 to 15kg)

3kg multi-interval (0 to 6kg, 6 to 15kg) **

4lbs multi-interval (0 to 15 lbs, 15 to 30 lbs)

**Common ranges used as default setting.

*These procedures are for MS2420/MS2430 Scanner/Diva Scale models only.

51