Battery

Start > Settings > Control Panel > Battery

This panel is used to view the status and percentage of power remaining in the Thor VM1 UPS battery.

The battery gas gauge icon resides in the system tray and shows four levels of charge – 100%, 75%, 50%, 25%. At a point below 25% the gas gauge icon will turn red indicating the battery is low.

The battery gauge icon is enabled by default, but can be disabled on the Thor VM1 Battery control panel. The UPS LED turns red when there is approximately 2 minutes of run time remaining.

Jacked is shown in the Status box when the UPS battery is receiving external power.

Bluetooth

Start > Settings > Control Panel > Bluetooth

Discover and manage pairing with nearby Bluetooth devices.

Factory Default Settings

Settings (page 5-32)

Turn Off Bluetooth

Enabled

 

 

Computer is connectable

Enabled

 

 

Computer is discoverable

Disabled

 

 

Prompt if devices request to pair

Enabled

 

 

Continuous search

Disabled

 

 

Filtered Mode

Enabled

 

 

Printer Port on COM 7:

Disabled (unchecked) by default in both Filtered and Non

 

Filtered Modes. The option is dimmed in Non Filtered

 

Mode.

 

 

Logging

Disabled

 

 

Computer Friendly Name

System Device Name

 

 

Reconnect (page 5-33)

 

 

 

Report lost connection

Enabled

 

 

Report when reconnected

Disabled

 

 

Report failure to reconnect

Enabled

 

 

Clear Pairing Table on boot

Disabled

 

 

Auto Reconnect on Boot

Enabled

 

 

Auto Reconnect

Enabled

 

 

Bluetooth taskbar Icon state and Bluetooth device Icon states change as Bluetooth devices are discovered, paired, connected and disconnected. There may be audible or visual signals as paired devices re-connect with the Thor VM1.

•The default Bluetooth setting is On.

•The Thor VM1 cannot be discovered by other Bluetooth devices when the Computer is discoverable option is disabled (unchecked) on the Settings panel.

5 - 29