Link speed indicates the speed at which the signal is being sent from the adapter to the Thor VM1. Speed is dependent on signal strength.

Exit

The Exit option is password protected. The default password is leave. The password is not case-sensitive.

Depending on the behavior chosen for the Shutdown parameter, the following screen may be displayed:

Note: The icon on the screen above may differ based on the version of the Enabler installed on the Thor VM1.

Change the option if desired. Tap the X button to cancel Exit. Tap the OK button to exit the Avalanche applet.

Using Remote Management

1.Configure the radio to connect to the network running the Mobile Device Server. After the Thor VM1 is connected, proceed to step 2.

2.If it is desired to configure the radio using the Summit package, add the configured package to the Wavelink Avalanche MC Console and enable it.

3.Verify RMU.CE.CAB exists in the \System\RMU folder.

4.Double-click the Thor VM1 enabler CAB file in the \System folder.

5.The enabler automatically launches after installation and contacts the Mobile Device Server. The Avalanche MC Console connected to that Mobile Device Server identifies the remote device and performs a sync. This downloads any available packages available for the Thor VM1.

7 - 14