If you ordered additional accessories for the Thor VM1, verify they are also included with the order. Keep the original packaging material in the event the Thor VM1 should need to be returned for service. For details, see Product Service and Repair (page 11-1).

Initial Setup for Thor VM1

This page lists a quick outline of the steps you might take when setting up a new Thor VM1. More instruction for each step is listed later in this guide.

Contact Technical Assistance (page 11-1)if you need additional help.

Hardware Setup

1.Install RAM Mount (page 4-4)or Install U Bracket Mount (page 4-10)to the vehicle.

2.Place Thor VM1 in the Dock (page 4-2).

3.Connect Cables (page 4-13)for any peripherals.

4.Connect Power (page 4-14).

5.Secure all cables in Strain Relief Cable Clamps (page 4-13).

6.Press the Power Switch (page 3-6)on the dock to the on position.

7.Press the Power Button (page 3-6)on the Thor VM1.

Software

Languages and Fonts

The Thor VM1 may be shipped with an English only operating system (OS). Contact Technical Assistance (page 11-1)for the availability of OS files for other languages. See Thor VM1 OS Upgrade (page 5-13)for OS update installation information. The language installed is identified on the Software tab of the About (page 5-17)control panel.

First Boot

When a new Thor VM1 starts up a EULA (End User License Agreement) may be displayed on the touch screen. It remains on the screen until the Accept or Decline button is tapped with a stylus.

Tap the Accept button to accept the EULA terms and the Thor VM1 continues the startup process. The EULA is not presented to the user again.

Tap the Decline button to decline the EULA and the Thor VM1 reboots. It will continue to reboot until the Accept button is tapped with the stylus.

Note: The EULA will be presented after any operating system upgrade or re-installation, including language-specific operating systems.

Software Setup

Hardware setup should be completed before starting software setup.

1.If prompted, perform touch screen Calibration (page 5-90).

2.Set Date / Time (page 5-56).

3.Set Power (page 5-84)scheme timers.

4.Adjust Speaker Volume (page 2-6).

5.Pair Bluetooth (page 5-29)devices

6.Set Wireless client parameters using the Summit Client Utility (page 8-1).

2 - 2