!If 2nd + F5 is remapped to another key, pressing 2nd + F5 generates the remapped key. However, if the next keypress is Shift, the Thor VM1 reboots. The remapped keypress DOES NOT affect the 2nd + F5 + Shift reboot key sequence.
Assign settings by clicking radio buttons and selecting keys from the drop down boxes. Tap the OK button when fin- ished. The changes take effect immediately.
Remap a Key to a Single Key1.Select the modifier key from the Modifier Mode options.
2.Select the key to be remapped from the Key
3.Select the value for the remapped key from the Remapped Key
4.Click OK to save the result and close the control panel.
Remap a Key to a Unicode Value1.Select the modifier key from the Modifier Mode options.
2.Select the key to be remapped from the Key
3.Select Unicode from the Remapped Key
4.There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the left text box and the Unicode character is displayed in the right text box.
5.Click OK to save the result and close the control panel.
Remap a Key to a Key SequenceUp to 16 keys may be specified for the key sequence. The sequence can consist of keys and Unicode values.
1.Select the modifier key from the Modifier Mode options.
2.Select the key to be remapped from the Key
3.Select Key Sequence from the Remapped Key
4.Select the first key for the multiple key sequence from the
5.Press the Add button to add the key to the multiple key sequence shown in the Key Sequence box.
6.Repeat this steps 4 and 5 until all desired keys have been added to the key sequence. If necessary, use the ton to erase all entries in the Key Sequence box.
7.Click OK to save the result and close the control panel.
5 - 70