1.Seat the D9 connector firmly over the USB Connector on the Quick Mount Smart Dock.

2.Tighten the thumbscrews in a clockwise direction. Do not over tighten.

3.The USB-host connector provides a connector for a USB device such as a USB thumb drive.

4.Secure the cables to the Thor VM1 with Strain Relief Cable Clamps (page 4-13).

Connect USB Client

USB Host Connector

D9 Connector

USB Client Connector

See USB Connector (page 10-5)for connector pinouts.

1.Seat the D9 connector firmly over the USB Connector on the Quick Mount Smart Dock.

2.Tighten the thumbscrews in a clockwise direction. Do not over tighten.

3.The USB client connector provides a client connection, such as for ActiveSync to a PC.

4.Secure the cables to the Thor VM1 with Strain Relief Cable Clamps (page 4-13).

Connect Serial Device

Note: Pin 9 of the desired COM port must be configured to provide +5V or RI as needed for the connected device. See the Thor VM1 Reference Guide for details.

See COM1 and COM2 Connector (page 10-4)for connector pinouts.

1.Seat the cable end connector firmly over the serial COM port on the Quick Mount Smart Dock.

2.Turn the thumbscrews in a clockwise direction. Do not over tighten.

3.Secure the cables to the Thor VM1 with Strain Relief Cable Clamps (page 4-13).

4.Connect the other cable end to the desired serial device.

4 - 34