Using the Keyswitch | Honeywell VISTA-21IPSIA manual

Keyswitch

Using the Keyswitch

Your system may be equipped with a keyswitch for use when arming and disarming. Red and green lights on the keyswitch plate indicate the status of your system as follows:

Green Light: Lights when the system is disarmed and ready to be armed (no open zones). If the system is disarmed and the green light is off, it indicates the system is not ready (one or more zones are open).

Red Light: Lights or flashes when system is armed in AWAY or STAY mode. See your installer for the meanings of the lit red light:

Lit Steady = system armed AWAY or

system armed STAY and exit delay has expired

Flashing = system armed STAY and exit delay timer active

Rapid flashing = an alarm has occurred (memory of alarm).

Before arming, close all perimeter doors and windows.

To arm in the AWAY mode:

Turn the key to the right for 1/2 second and release. Keypads beep twice and the red indicator lights or flashes.

To arm in the STAY mode:

Turn the key to the right and hold for longer than 1 second, then release. Keypads beep three times and the red indicator lights or flashes.

To disarm the system:

Turn the key to the right and release. The red light turns off

GREEN	RED
	keyswitch-001-V1

– 20 –

Image 20

Honeywell VISTA-21IPSIA Using the Keyswitch, To arm in the Away mode, To arm in the Stay mode, To disarm the system

Contents

Ademco Vista Series About This Manual Table of Contents Table of Contents System Basics System OverviewIntroduction System Overview cont’d Using the Voice Message Center if Voice Keypad is installed Paging FeatureFunction Keys Scheduling About The Keypads General Information About The Keypads cont’d Armed Ready Message MIC FIXED-WORD Display Keypad Functions of the Keypads Armed Ready Message MIC Functions of the Keypads cont’d MIC Exit Delay Entry/Exit DelaysEntry Delay Exit Error Conditions Entry/Exit Delays cont’dExit Alarms Checking For Open Zones Using the ∗ Key to Display and Announce System StatusTo turn the Voice Status feature on/off # Instant Mode Arms Perimeter Only, Entry Delay Off Away Mode Arms Entire System, Entry Delay OnMaximum Mode Arms Entire System, Entry Delay Off Arming the System Arming Commands Mode Press these keys… Keypad Confirms By…Arming the System cont’d Quick Arming Key First Press Second Press Third Press Single Button ArmingSingle Button Step Arming Keyswitch Using the KeyswitchTo arm in the Away mode To arm in the Stay mode Disarming and Silencing Alarms Using the OFF key Using the Bypass Key Bypassing Protection Zones Bypassing Protection Zones cont’d Quick Bypass Using the Voice Chime Chime ModeUsing the Chime Mode Viewing the Current Date and Time Setting the Date and TimeDate and Time Using Panic Keys This Function Sends This Signal With This Sounding…Panic Keys To activate a Panic Function Macro Key Programming & Usage About Macro Keys Example of Macro Programming Using a Programmed Macro KeyMacro Key Programming & Usage cont’d Using Device Commands About Device CommandsTo Activate Devices To Deactivate Devices Paging Feature About Automatic Paging Latch Key Paging Paging Feature cont’dAbout Manual Paging Authority Level Definitions Security Codes & Authority LevelsAbout Security Codes How to Assign Security Codes and Attributes Security Codes & Authority Levels cont’d Goto Command and Multi-Partition Arming Accessing Other PartitionsAbout Accessing Partitions Multi-Partition Arming Accessing Other Partitions cont’dUsing the GoTo Command Common Zone Operation Scheduling About Scheduling Scheduling cont’d Event Logging Procedures About Event LoggingViewing the Event Log Understanding the Type of Event Displayed Event Logging Procedures cont’d STAY/INSTANT Testing the System About Testing the System If there are wireless sensors* in your system, the Check Trouble Conditions Alarm 1xx Fault 1xx Check Trouble Conditions cont’dRcvr Jam Or Check Long Rng Trbl Or no ACBusy-Standby Maintaining Your System Fire Alarm System This Section Applies only to Residential Systems Or Key Pairs Fire Alarm System cont’dIndividual Keys Kitchen Dining Emergency Evacuation Function Procedure Comments Quick Guide to Basic System Functions Summary of Audible/Visual Notifications Fixed-Word Display Keypads Summary of A/V Notifications cont’d Alpha Display Keypads Industry Canada Regulatory Statements and WarningsFCC Part Industrie Canada Regulatory Statements cont’dRinger Equivalence Number Notice System Features Log System Features Log cont’d User Setup User Setup cont’d Paging Setup List of Output Devices OWNER’S Insurance Premium Credit Request Cont Page Page Limitations of this System ÊK14490V1Š