Fire Alarm System (cont’d)

THIS SECTION APPLIES ONLY TO RESIDENTIAL SYSTEMS

Emergency Evacuation

 

CLOSET

BEDROOM

 

PORCH

BEDROOM

BATH

BEDROOM

 

2nd FLOOR

KITCHEN

BEDROOM

BACK DOOR

BEDROOM

BATH

1st FLOOR

BACK

FRONT

plan-002-V0

floor

 

Establish and regularly practice a plan of escape in the event of fire. The following steps are recommended by the National Fire Protection Association:

1.Position your detector or your interior and/or exterior sounders so that they can be heard by all occupants.

2.Determine two means of escape from each room. One path of escape should lead to the door that permits normal exit from the building. The other may be a window, should your path be impassable. Station an escape ladder at such windows if there is a long drop to the ground.

3.Sketch a floor plan of the building. Show windows, doors, stairs and rooftops that can be used to escape. Indicate escape routes for each room. Keep these routes free from obstruction and post copies of the escape routes in every room.

4.Assure that all bedroom doors are shut while you are asleep. This will prevent deadly smoke from entering while you escape.

5.Try the door. If the door is hot, check your alternate escape route. If the door is cool, open it cautiously. Be prepared to slam the door if smoke or heat rushes in.

6.When smoke is present, crawl on the ground. Do not walk upright, since smoke rises and may overcome you. Clearer air is near the floor.

7.Escape quickly; don't panic.

8.Establish a common meeting place outdoors, away from your house, where everyone can meet and then take steps to contact the authorities and account for those missing. Choose someone to assure that nobody returns to the house — many die going back.

– 49 –

Page 49
Image 49
Honeywell VISTA-21IPSIA manual Emergency Evacuation