Honeywell VISTA-21IPSIA manual Functions of the Keypads cont’d

Functions of the Keypads (cont’d)

NOTE: The functions printed directly on the keys indicate their primary purpose; the functions printed under some of the keys (shown in brackets under the respective key), indicate their alternate or secondary purpose.

1.DISPLAY WINDOW

Alpha Display Keypads: 2-line, 32- character Liquid Crystal Display (LCD) keypads that display protection point identification, system status, and messages.

Fixed-Word Display Keypads: Display protection zone ID and system status messages using pre-designated words in the LCD display area.

2.1 OFF Disarms burglary portion of

the system, silences alarms and audible trouble indicators, and clears visual display after problem's correction.

[RECORD] On Voice keypads, used in conjunction with the FUNCTION and VOICE keys to record up to a 2.5- minute message.

3.2 AWAY Arms the entire burglary

system, perimeter and interior. [VOLUME] On Voice keypads, used in conjunction with the FUNCTION and desired volume control keys ↑ [3] or ↓

[6]to adjust the volume of a recorded message or voice system status.

4.3 STAY Arms perimeter portion of

burglary system only. Interior protection is not armed, allowing movement within premises without causing an alarm. If pressed twice in succession, arms system in Night-Stay mode.

[PLAY] On Voice keypads, used in conjunction with the FUNCTION and VOICE keys to play the recorded message.

[ ↑ ] On Voice keypads, used in conjunction with the FUNCTION and VOLUME keys to raise the message and voice system status volume.

5.4 MAX Arms the entire burglary

system, perimeter and interior, but without entry delay feature. Entering via an entry/exit door will cause an alarm.

6.5 TEST Tests the system and alarm

sounder if disarmed. Refer to Testing The System section for test procedures.

7. 6 BYPASS Removes individual

protection zones from being monitored by the system.

[ ↓ ] On Voice keypads, used in conjunction with the FUNCTION and VOLUME keys to lower the message and voice system status volume.

8.7 INSTANT Arms in manner similar to

the STAY mode, but without the entry delay feature.

Entering via an entry/exit door will cause an alarm.

9.8 CODE Used to assign additional

security codes and attributes for other users of the system.

10.9 CHIME Turns CHIME mode on and

off. When on, the opening of windows or doors while the system is disarmed will sound 3 beeps at the keypad(s).

– 12 –