Honeywell VISTA-21IPSIA manual Quick Guide to Basic System Functions

Quick Guide to Basic System Functions

FUNCTION	PROCEDURE	COMMENTS
Check Zones	Press READY key.	View faulted zones when system not
		ready.
Arm System	Enter code. Press arming key desired:	Arms system in mode selected.
	(AWAY, STAY, NIGHT-STAY, MAXIMUM,
	INSTANT)
Quick Arm	Press #. Press arming key desired:	Arms system in mode selected, quickly
(if programmed)	(AWAY, STAY, MAXIMUM, INSTANT)	and without use of a code.
Bypass Zone(s)	Enter code. Press BYPASS [6] key.	Bypassed zones are unprotected and
	Enter zone number(s) to be bypassed	will not cause an alarm if violated.
	(use 2-digit entries).
Quick Bypass	Enter code. Press BYPASS [6] key + [#].	Bypasses all faulted zones
(if programmed)		automatically.
Silence Sounders
Burglary:	Enter code. Press OFF [1] key.	Also disarms system. Memory of alarm
		remains until cleared.
Fire or CO:	Press OFF [1] key.	Memory of Alarm remains until
		cleared.
"Check":	Press any key.	Determine cause.
Disarm System	Enter code. Press OFF [1] key. (OFF need	Also silences sounders. Memory of
	not be pressed if entry delay or an alarm is	alarm remains until cleared.
	active)
Clear Alarm	After disarming, enter code again.	Keypad beeps rapidly on entry if alarm
Memory	Press OFF [1] key again.	has occurred while absent. Alarm
		display will remain upon disarming
		until cleared.
Duress (if active	Arm or disarm "normally," but use your 4-	Performs desired action and sends
and connected to	digit Duress code to do so.	silent alarm to Central Station.
Central Station)
Panic Alarms	Press key [A], [B], or [C] for at least 2	See the Panic Keys section for
(as programmed)	seconds, or key pairs 1 + ✱; ✱ + #, or 3 + #	emergency functions programmed for
	respectively.	your system. Note: Keys “A”, “B”, and
		“C” may have been programmed for
		other functions.
Chime Mode	To turn ON or OFF: Enter code. Press	The keypad will sound if doors or
	CHIME key.	windows are violated while system is
		disarmed and chime mode is ON.
Test Mode	To turn ON: Enter code. Press TEST key,	Tests alarm sounder and allows
	then [0].	sensors to be tested.
	To turn OFF: Enter code. Press OFF key.
Phone Access	Consult Phone Access User's Guide that	Permits system access remotely, via
if applicable	accompanies the Phone Module.	Touch-tone phone.

– 50 –