Hoover 4600 Attach filter bag, Attach hose and tools, 1-19, 1-20, 1-21, 1-22, 1-23, 1-24, 1-25

1-19

U

T

Attach filter bag

Align opening (U) in filter bag with dirt tube (T) inside bag compartment.

1-20

Push bag collar firmly onto dirt tube. Tuck top and bottom of bag into bag compartment.

1-21

V

To replace bag door, insert the tabs (V) on bottom of bag door into the slots on bag compartment.

Make sure all edges of paper bag are completely inside the bag compartment.

Close door.

1-22

E

Break off red tab (E) above ON-OFF switch by pushing down on tab.

Note: If tab has come off during assem- bly make sure switch is in the OFF posi- tion (down) before plugging cord into an electrical outlet.

1-23

Attach hose and tools

Place round end of hose over round extension on bottom of rack.

1-24

Press hose firmly into rack at upper extensions.

1-25

Insert hose connector, with latch toward front of cleaner, into opposite side of rack.

1-26

W

With smaller end toward bottom, snap wand (W) into clips on rack. Second wand (some models only) fits in front of first wand and snaps into outer clips.

1-27

X

Position dusting brush (X) into rack as shown.

6