|
Y |
Place furniture nozzle (Y) on lip on lower part of rack and snap into place.
|
Z |
AA |
Slide crevice tool (Z) onto projection. Snap into place.
Remove rectangular foam retainer (AA), if present, (part of protective packing material) located under the handle release lever. Discard foam retainer.
CAUTION: When cleaner is turned on, the agitator brush roll will continue to rotate while cleaner handle is in upright position. Avoid tipping clean- er or setting it on furniture, fringed area rugs or carpeted stairs during tool use.
2. How to user
Cleaner description
1 |
|
| |
|
|
| |
| 2 |
|
|
|
|
| 2 |
|
| 3 |
|
|
| 15 | 16 |
|
| 4 | |
|
| 4 |
|
|
| 5 | 17 |
|
|
| |
14 |
|
| 2 |
|
| 19 | |
|
| 6 |
|
|
|
| 18 |
13 |
| 8 |
|
|
|
| |
12 |
| 7 |
|
|
|
| |
11 | 10 | 9 |
|
The assembled cleaner will look like the drawing.
1.Handle
2.Cord hooks: wrap cord around hooks for storage. The top hook can be rotated right or left for easy cord release.
3.Bag door latch
4.ON/OFF switch: located on side of handle.
5.Bag door
6.Stair cleaning handle: located on lower edge of bag.
7.Handle release lever: step on lever to lower handle to operating or low position.
8.Cleaner body
9.Nozzle control knob: slide knob to correct setting for height of carpet being cleaned.
10.Headlight (some models only)
11.Furniture guard: helps prevent cleaner from marking furniture.
12.Hose door: open door to connect hose to cleaner.
13.Hood
14.Hose
15.Tool rack
16.Dusting brush
17.Wand(s)
18.Furniture nozzle
19.Crevice tool
Operate cleaner only at voltage specified on bottom plate on bottom of cleaner.
Continued ➜
7
