Cleaning lightweight rugs
To clean lightweight flexible rugs, stand on one end of rug and move cleaner toward other end or edge. Before reach- ing edge, push down on handle. This will lift up the nozzle (front of cleaner) and will prevent rug from clinging to cleaner. Continue to lift up nozzle so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower nozzle, and use only forward strokes.
|
Edge cleaning
Edge cleaning is provided on both sides of nozzle to remove dirt in carpet near baseboards and furniture. Guide either side of nozzle parallel to edge of carpet or furniture.
|
Stair cleaning
A stair cleaning handle has been designed for ease in using your cleaner on stairs. With handle in operating posi- tion, place fingers under edge of stair cleaning handle and guide cleaner with other hand on upper handle.
As an alternative, you may use the hose and furniture nozzle for stair cleaning. Clean stairs from bottom to top.
When using cleaning tools, the agita- tor will continue to rotate.
CAUTION: To avoid personal injury or unnecessary wear to carpet, and to prevent the cleaner from falling, use extra care if cleaner is placed on stairs.
2-12
|
E |
2-14
1
3
4
2
Cleaning tools
The tool set includes a hose, wand(s)*, crevice tool, furniture nozzle and dusting brush.
*some models include two wands
Attach hose to cleaner
Turn cleaner OFF before attaching or removing hose.
With cleaner handle in upright position, open hose door and insert hose connec- tor until locked in position. Suction will automatically be diverted to the hose when cleaner is turned on.
To remove hose, press latch (E) on hose connector and pull up.
Note: Hose must be removed from hose door when cleaning carpet and rugs to insure proper cleaning performance.
CAUTION: Agitator continues to rotate while cleaner handle is in upright posi- tion. Avoid tipping cleaner or setting it on furniture, fringed area rugs, or car- peted stairs during tool use.
Select proper tool
1.Dusting brush may be used for carved furniture, table tops, books, lamps, lighting fixtures, venetian blinds, baseboards, shutters, and registers.
2.Furniture nozzle may be used for upholstered furniture, draperies, tapes- tries, mattresses, clothing, automobile interiors, and carpeted stairs.
3.Crevice tool may be used in tight spaces, corners and along edges in such places as dresser drawers, uphol- stered furniture, stairs, and baseboards.
4.Wand(s)* used to give extra length to your hose. Use it with any of the above tools.
*some models include two wands
Continued ➜
9
