Assembly
UNPACKING
Unpack the product where you will be using it. Place the product on a level flat surface. It is recom- mended that you place a protective covering on your floor. NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.
Parts
•1 Power Supply
•1 Front Tube
•2 Upper Handlebars
•2 Lower Handlebar Assemblies
•2 Foot Pad Brackets
•1 Console
•2 Pedal Arm Sleeves
•1 Console Mast Boot
•1 Hardware Pack (contents listed below)
Tools (included)
•5mm Allen Wrench
•4mm Allen Wrench
•Phillips Screw Driver
•13/15mm Flat Wrench
•17mm Flat Wrench
HARDWARE
A) 15mm bolt | B) 20mm Bolt | C) 17mm Nylon Nut | D) 25mm Washer | ||
Quantity: 6 | Quantity: 4 | Quantity: 2 | (I.D. 10mm) | ||
|
|
|
| Quantity: 4 | |
|
|
|
|
|
|
|
|
|
|
|
|
F) 8mm Screw
Quantity: 8
G) 60mm bolt
E) 30mm Wavy
Washer
Quantity: 3
CONTACT HORIZON FITNESS CUSTOMER ASSISTANCE CENTER; TOLL FREE @
7
