A S S E M B LY STEP 4
HARDWARE BAG 4 CONTENTS :
BOLT (I) 15 mm Qty: 4
CONSOLE MAST 
SUPPORT BAR
BOLT (I)
A.Open Hardware Bag 4.
B.Align SUPPORT BAR with holes in CONSOLE MASTS.
C.Insert BOLTS (I) into all 4 holes of the SUPPORT BAR.
NOTE: Look into holes in the right mast before inserting bolts to avoid pinching cables.
D.Tighten all console bolts (Step 3) and support bar bolts (Step 4) completely.
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
BEFORE YOU BEGIN
TREADMILL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
11
LIMITED WARRANTY
