C. Preparing the Icemaker for Long Storage
CAUTION
When storing the icemaker for an extended time or in
When the icemaker is not used for two or three days under normal conditions, it is sufficient to move the power switch to the "OFF" position. When storing the icemaker for an extended time or in
1)Move the power switch to the "OFF" position, then unplug the unit from the electrical outlet.
2)Close the water supply line
3)While maintaining a hold on the door, remove the hinge stop pin from hinge (B). Pull out the bottom of the door slightly, then gently remove the door from hinge (A). See Fig. 10.
4)Remove the 2 screws securing the top panel, then lift it off.
5)Remove all ice from the storage bin.
6)Remove the screws securing the upper rear panel, then remove it.
7)Remove the clamp securing the drain plug, then lower the drain hose into a container. See Fig. 11. Remove the drain plug to drain the water from the reservoir and evaporator assembly.
8)After all of the water has drained, replace the drain hose, drain plug, drain clamp and all other removed parts in their original and correct positions.
9)Open the water supply line drain valve.
10)From the water supply line drain valve, blow the water supply line out using compressed air or carbon dioxide.
11)Close the water supply line drain valve.
12)Clean the storage bin by using a neutral cleaner. Rinse thoroughly after cleaning.
44
