5.Sanitizing Procedure - Final
1)Remove the drain plug to drain any remaining solution.
2)After all of the solution has drained, replace the drain plug in its correct position.
3)Remove the reservoir cover. Pour the sanitizing solution into the reservoir until the solution starts to flow through the overflow hose.
4)Allow the icemaker to sit for 10 minutes before operation.
5)Plug the unit back in. Move the power switch to the "ON" position.
6)Allow the unit to make ice using the solution. When ice stops coming out, move the power switch to the "OFF" position. Unplug the unit from the electrical outlet.
7)Remove the drain plug to drain any remaining solution.
8)After all of the solution has drained, replace the drain plug in its correct position.
9)Remove the reservoir cover. Using a clean container, pour water into the reservoir until it starts to flow through the overflow hose. Replace the reservoir cover in its correct position.
10)Remove the drain plug to drain the water.
11)After all of the water has drained, replace the drain hose, drain plug, drain clamp and all other removed parts in their original and correct positions. WARNING! CHOKING HAZARD: Ensure all components, fasteners, and thumbscrews are securely in place. Make sure that none have fallen into the storage bin.
12)Open the water supply line
13)Plug the unit back in. Move the power switch to the "ON" position and allow the icemaker to run.
14)After 30 minutes, move the power switch to the "OFF" position. Unplug the unit.
15)Pour warm water into the storage bin to melt all of the ice, then clean the storage bin liner, door liner, and door gasket with a neutral cleaner. Rinse thoroughly after cleaning.
16)Plug the unit back in. Move the power switch to the "ON" position to start the automatic icemaking process.
30
