C. Door
1. C-101BAH, C-101BAH-AD
a)Door Reversal
If you would like to reverse the door swing, follow the steps below. Otherwise, skip to section "II.D. Setup."
1)While maintaining a hold on the door, remove the hinge stop pin from hinge (B). Pull out the bottom of the door slightly and gently remove the door from hinge (A). See Fig. 1.
Hinge (B)
Hinge (A)
Hinge Stop Pin
Fig. 1
2) Remove the 2 bolts securing the top panel, then lift it off. See Fig. 2.
| Bolts | |
Top Panel | ||
|
Fig. 2
3)Remove hinge (A) and the bracket from the right side of the appliance and the top brace from the left side. Rotate hinge (A) to position the gasket notch to the inside, then fasten hinge (A) and the bracket to the left side and the top brace to the right side. See Fig. 3.
Bracket 
Screw
Hinge (A)
Screw | Fig. 3 |
Top Brace |
|
Gasket Notch
13
