Hotpoint 50HGP Care and Cleaning, Glass Inner Door Panel where fitted, Side Opening Doors

Models: 50HGP HUG 52G HUG 52K HUG 52X HUG 52P

1 24
Download 24 pages 57.58 Kb
Page 19
Image 19
Glass Inner Door Panel (where fitted) –

Care and Cleaning

Doors

Wipe over the outer door glass panels with a cloth wrung out in warm soapy water, then after wiping with a cloth wrung out in clear water, dry with a soft clean cloth. Ensure that glass doors are not subjected to any sharp mechanical blows.

Glass Inner Door Panel (where fitted)

open the door fully and carefully slide the inner glass towards you, taking care not to allow the glass to fall.

The glass panel may now be washed at the sink. Stubborn stains can be removed by using a fine steel wool soap pad. Ensure the glass panel is not subjected to any sharp mechanical blows. Take particular care not to damage the inner surface which is coated with a heat reflective layer. After cleaning, rinse and dry with a soft cloth. For slight soiling the inner glass panel may be cleaned, while still warm, without removing it from the door. Warning: Oven must not be operated with inner door glass removed.

SIDE OPENING DOORS

GB

 

Cleaning the door glass is the same as the drop

 

 

down doors, except take care to support the weight

 

of the inner glass when removing and refitting.

 

Take care during cleaning not to damage or distort the door seals. Do not lift the door seal from the oven chassis, if necessary remove the seal by carefully unhooking the corner clips.

Take care that the rating label edges are not lifted during cleaning, and furthermore that the lettering is not blurred or removed.

When refitting the glass make sure it is fitted correctly i.e. reflective face is fitted the right way round.

COOKER FINISH

CLEANING METHOD

 

 

Vitreous Enamel

Cloth wrung out in warm soapy water. Stubborn stains can be

Door inner panels, pan supports, burner caps,

removed with a cream paste, liquid cleaner or by rubbing with fine

roasting dish, grill pan, main oven base, inside of

steel wool soap pads.

grill compartment.

Check that the cleaning agent is approved by the Vitreous Enamel

Hotplate

Association.

 

 

Paint

Wash with a cloth wrung out in warm soapy water only.

Side panels.

DO NOT USE ABRASIVES.

Control panel, lid front trim

 

 

 

Aluminium

Similar to paint cleaning above. Use a nylon brush to remove any

Hotplate burner bodies, lid rear trim.

cleaning materials, water or dirt from the hotplate burner bodies.

 

 

Glass

As for enamel cleaning. Polish with a clean dry cloth or kitchen roll.

 

 

Chromium Plating

Wipe with a cloth wrung out in warm soapy water. A fine steel wool

Oven shelves, grill pan grid, grill pan handle

soap pad e.g. Brillo, Ajax, or a chrome or stainless steel cleaner

support.

may be used.

 

 

Plastic

Wipe with a cloth wrung out in warm soapy water.

Control knobs.

 

Stainless Steel

Wipe with a cloth wrung out in warm soapy water. Polish with a

clean dry cloth or kitchen towel. For stubborn stains, use a

Hotplate, control panel ,grill pan handle,

proprietary stainless steel cleaner and follow the instructions on the

 

container.

 

 

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

19

Page 19
Image 19
Hotpoint 50HGP, HUG 52P, HUG 52X, HUG 52K, HUG 52G Care and Cleaning, Glass Inner Door Panel where fitted, Side Opening Doors