Note
Note
Cleaning the printer media path
If you are experiencing toner specks or dots on the printouts, you can use the HP LaserJet cleaning utility to remove excess media and toner particles that can accumulate on the fuser assembly and rollers. Cleaning the media path might extend the life of the printer.
For best results use a sheet of transparency. If you do not have any transparencies, you can use copier grade media (18 to 24 lb. or 70 to 90 g/m2) with a smooth surface.
1Make sure that the printer is idle and the Ready light is on.
2Load the media in the input tray.
3Access the HP toolbox. See Using the hp toolbox for instructions. Click the Troubleshooting tab, and click Print Quality Tools. Select the cleaning page.
The cleaning process takes approximately 2 minutes. The cleaning page will stop periodically during the cleaning process. Do not turn the printer off until the cleaning process has finished. You might need to repeat the cleaning process several times to thoroughly clean the printer.
48 Chapter 4 | ENWW |