Maintenance & Service Guide
Presario 1600 Series Portable Computers
Notice Preface Home Product Description Troubleshooting Illustrated Parts Catalog
Removal & Replacement Procedures Specifications Connector Pin Assignments Battery Pack
Removing The Plastic Subpanel Assembly
Removing
the Battery Pack
Palmrest Cover with Touch Pad
Keyboard Heatspreader Status Panel
Interface Board
Hard Drive
Battery
Charger
Board CD Drive
Display
Assembly
Plastic
Subpanel
Assembly
CD Drive
Cable
Speaker
Assembly
Modem
Diskette
Drive
Fan
Audio
Assembly
Board
System
Board
Memory
Module
Removing the Screws from the Plastic Subpanel Assembly
1.Prepare the computer for disassembly.
2.Remove the screw of the plastic subpanel assembly
from the bottom of the computer located near the battery pack .
3.Remove the palmrest cover with touch pad.
4.Remove the keyboard.
5.Remove the heatspreader.
6.Remove the display assembly with flex cable attached.
7.Remove three screws located at the top, two screws located in the right corner, and release the snap located in the left corner of the plastic subpanel assembly as shown.
Next
