1

Getting Started

Watch for this symbol in the margin. It identifies examples v or keystrokes that are shown in ALG mode and must be performed differently in RPN mode. Appendixes D, E, and F

explain how to use your calculator in RPN mode.

The mode affects only arithmetic calculations—all other operations, including the Solver, work the same in RPN and ALG modes.

Power On and Off; Continuous Memory

To turn on the calculator, press C(clear) (note ON printed below the key). To turn it off, press @and then C. This shifted function is called o(note OFF printed above the key). Since the calculator has Continuous Memory, turning it off does not affect the information you’ve stored there.

To conserve energy, the calculator turns itself off after 10 minutes of no use.

If you see the low battery symbol ( ) at the top of the display, you should replace the batteries as soon as possible. Follow the instructions on page 224.

Adjusting the Display Contrast

The display’s brightness depends on lighting, your viewing angle, and the display contrast setting. To change the display contrast, hold down the Ckey and press +or -.

1: Getting Started 17

File name : English-M02-1-040308(Print).doc Print data : 2004/3/9

Page 17
Image 17
HP 17bII manual Getting Started, Power On and Off Continuous Memory, Adjusting the Display Contrast