Memory module
Description | Spare part number |
|
|
|
|
|
|
Update BIOS before adding memory modules
Before adding new memory, make sure you update the computer to the latest BIOS.
CAUTION: Failure to update the computer to the latest BIOS prior to installing new memory may result in various system problems.
To update BIOS:
1.Navigate to www.hp.com.
2.Click Support & Drivers > click Drivers & Software.
3.In the Enter a product name/number box, type the computer model information, and then click Search.
4.Click the link for the computer model.
5.Select the operating system, and then click Next.
6.Under Step 2: Select a Download, click the BIOS link.
7.Click the link for the most recent BIOS.
8.Click the Download button, and then follow the
Before removing a memory module, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 23).
5.Remove the rear cover (see Rear cover on page 26).
6.Disconnect the battery cable (see Hard drive on page 27).
Remove the memory module:
1.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The memory module tilts up.)
Component replacement procedures 29
