2.Detach and release the webcamera/microphone module (2) from the display assembly. (The webcamera/microphone module is attached to the display assembly with
Reverse this procedure to install the webcam/microphone module.
Audio/USB board
NOTE: The audio/USB board spare part kit does not include the audio/USB board ribbon cable. The audio/USB board ribbon cable is included in the Cable Kit, spare part number
Description | Spare part number |
|
|
Audio/USB board |
|
|
|
Before removing the audio/USB board, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
4.Remove the bottom cover (see Bottom cover on page 23).
5.Remove the rear cover (see Rear cover on page 26).
6.Disconnect the battery cable (see Hard drive on page 27).
7.Remove the hard drive (see Hard drive on page 27).
8.Remove the cover bracket (see X-axis capacitor board on page 33).
9.Remove the display stand recess (see Display stand recess on page 41).
Component replacement procedures 47