Bottom cover
Description | Spare part number |
|
|
Bottom cover (includes 2 captive screws, secured by | |
|
|
Before disassembling the computer, follow these steps:
1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect the power from the computer by unplugging the power cord from the computer.
3.Disconnect all external devices from the computer.
Remove the bottom cover:
CAUTION: Before positioning the computer with the display screen facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display screen.
1.Position the computer with the display screen facing down and the bottom edge toward you.
2.Press in on the media card reader slot bezel (1) to release the bezel from the slot, and then press in on the bezel (2) a second time to remove the bezel from the slot.
The media card reader slot bezel is included in the Rubber Kit, spare part number
3.Remove the two rubber screw covers (1).
The rubber screw covers are included in the Rubber Kit, spare part number
4.Loosen the two Phillips PM2.5×5.0 captive screws (2) that secure the bottom cover to the computer.
Component replacement procedures 23
