HP 20-k120us Mobile, 20-k127cl Mobile, 20-k121us Mobile manual Axis capacitor board 728067-001

Remove the USB board:

1.Release the ZIF connector (1) to which the USB board ribbon cable is attached, and then disconnect the USB board ribbon cable from the system board.

2.Detach the USB board ribbon cable (2) from the middle frame. (The USB board ribbon cable is attached to the middle frame with double-sided adhesive.)

3.Remove the three Phillips PM3.0×6.5 screws (3) that secure the USB board to the display assembly.

4.Remove the USB board (4) and cable.

Reverse this procedure to install the USB board.

X-axis capacitor board

NOTE: The X-axis capacitor board spare part kit does not include the X-axis capacitor board cable. The X-axis capacitor board cable is included in the Cable Kit, spare part number 728048-001. See Cable Kit on page 12 for more Cable Kit information.

Description	Spare part number
X-axis capacitor board	728067-001

Before removing the X-axis capacitor board, follow these steps:

1.Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect the power from the computer by unplugging the power cord from the computer.

3.Disconnect all external devices from the computer.

4.Remove the bottom cover (see Bottom cover on page 23).

Component replacement procedures 33