CHAPTER 9: Configuring Network Settings
Configuring Transparent Mode
Transparent Mode requires valid IP addresses for all computers on your network, and allows remote access to authenticated users.
To enable Transparent Mode:
1 Click the Edit Icon | in the line for the OPT interface in the Interfaces table. The OPT Properties |
window displays. |
|
2Select OPT in Transparent Mode. The OPT and WAN IP addresses are now identical.
3To add an address or range of addresses, click Add below the address range list. The Add Opt Entry dialog box displays.
4Enter a single IP address or the beginning of a range of IP addresses in the IP Address From field.
Note: The address or range of addresses must be within the available range of IP addresses for your WAN interface.
5For a range of IP addresses, enter the ending address in the IP Address To field.
6Click OK and then click Apply.
72 | SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE |
