CHAPTER 22: Setting Up the WLAN Using the Wireless Wizard and Monitoring Your WLAN
WLAN Settings
In addition to providing different status views for Access Point and Wireless Bridge modes, two new functions have been added to the Wireless > Status page:
Hyperlinked WLAN Settings - All configurable WLAN settings are now hyperlinked to their respective pages for configuration. (Present in both Access Point and Wireless Bridge modes). Enabled features are displayed in green, and disabled features are displayed in red.
Automated Station Blocking - Previously, the Station Status view allowed for stations to be added to the MAC allow list, or disassociated from the TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless. The disassociated station, however, could easily
Access Point Status
WLAN Settings | Value |
|
|
|
|
WLAN: | Enabled or Disabled |
|
|
WiFiSec: | Enabled or Disabled |
|
|
SSID: | Network Identification Information |
|
|
MAC Address: | Serial Number of the TZ 150 Wireless/TZ 170 Wireless |
|
|
WLAN IP Address: | IP address of the WLAN port |
|
|
WLAN Subnet Mask: | Subnet information |
|
|
Regulatory Domain | FCC - North America for domestic appliances ETSI - Europe for |
| international appliances |
|
|
Channel | Channel Number selected for transmitting wireless signal |
|
|
Radio Tx Rate | Network speed in Mbps |
|
|
Radio Tx Power | the current power level of the radio signal transmission |
|
|
Authentication Type | the type of WEP or PSK authentication or Disabled |
|
|
MAC Filter List | Enabled or Disabled |
|
|
Wireless Guest Services | Enabled or Disabled |
|
|
Wireless Firmware: | Firmware versions on the radio card |
|
|
Associated Stations: | Number of clients associated with the TZ 150 Wireless/TZ 170 |
| Wireless |
|
|
Radio Mode | Radio Frequency and 802.11 mode: 2.4GHz 802.11b/g Mixed, |
| 2.4GHz 802.11g Only, or 2.4GHz 802.11b Only |
|
|
136 | SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE |