SonicWALL 3 manual Configuring the WAN Network Mode

Using the SonicWALL Setup Wizard

Configuring WiFiSec - VPN Client User Authentication

8WiFiSec and Group VPN are automatically enabled on the security appliance using the default settings associated with each feature. To add a user with VPN Client privileges, type a user name and password in the User Name and Password fields. When users access the security appliance using the VPN client, they are prompted for a user name and password. Click Next.

Configuration Summary

9The Configuration Summary page displays all of the settings configured using the Deployment Scenario Wizard. To change any of the settings, click Back until you see the settings you want to change. To apply the current settings to the security appliance, click Apply.

Storing Configuration

10Wait for the settings to take effect on the security appliance.

Congratulations!

When the settings are applied to the security appliance, the Congratulations page is displayed. Click Restart to complete the configuration.

Configuring the TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless as a Guest Internet Gateway

Configure your wireless security appliance to provide guests controlled wireless access to the Internet only.

Log into the SonicWALL TZ 50 Wireless/TZ 150 Wireless/TZ 170 Wireless using your administrator’s name and password. Click Wizards in the top right corner of the System > Status page.

Welcome to the SonicWALL Setup Wizard

1To begin configuration, select Setup Wizard and click Next.

Selecting the Deployment Scenario

2Select Guest Internet Gateway as the deployment scenario. Click Next.

Changing the Password

3Type a new password in the New Password field. The password should be a unique combination of letters, or number, or symbols, or a combination of all three for the most secure password. Avoid names, birthdays, or any obvious words. Retype the password in the Confirm field. Click Next.

Selecting Your Time Zone

4Select your Time Zone from the Time Zone menu. The security appliance uses an internal clock to timestamp logs and other functions requiring time. Click Next.

Configuring the WAN Network Mode

5Confirm that you have the proper network information necessary to configure the SonicWALL security appliance to access the Internet. Click the hyperlinks for definitions of the networking terms.

You can choose:

ŠStatic IP, if your ISP assigns you a specific IP address or group of addresses.

ŠDHCP, if your ISP automatically assigns you a dynamic IP address.

SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE 21