SonicWALL 3 manual Modem Dialup Profiles Modem Profile Configuration, 121

Models: 3

1 348
Download 348 pages 8.9 Kb
Page 140
Image 140

Modem > Dialup Profiles > Modem Profile Configuration

8Click the ISP Address tab.

9In the ISP Address Setting section, select Obtain an IP Address Automatically if you do not have a permanent dialup IP address from your ISP. If you have a permanent dialup IP address from your ISP, select Use the following IP Address and enter the IP address in the corresponding field.

10If you obtain an IP address automatically for your DNS server(s), select Obtain an IP Address Automatically. If your ISP has a specific IP address for the DNS server(s), select Use the following IP Address and enter the IP address of the primary DNS server in the corresponding field. You can also add a secondary DNS server address in the field below.

11Click on the Location tab. Use the settings in the page to configure modem dialup behavior.

In the Dial Type menu select one of the following options:

Persistent Connection - By selecting Persistent Connection, the modem stays connected unless you click the Disconnect button on the Network > Settings page. If Enable WAN Failover is selected on the Modem>Failover page, the modem dials automatically when a WAN connection fails. If the Primary Profile cannot connect, the modem uses the Alternate Profile 1 to dial an ISP.

SONICWALL SONICOS STANDARD 3.0 ADMINISTRATORS GUIDE

121

Page 140
Image 140
SonicWALL 3 manual Modem Dialup Profiles Modem Profile Configuration, 121