Using the SonicWALL Setup Wizard
Configuring WAN Settings
7If you selected Static IP address, you must have your IP address information from your ISP to fill in the WAN Network Mode fields: Enter the public IP address provided by your ISP in the SonicWALL WAN IP Address, then fill in the rest of the fields: WAN Subnet Mask, Gateway (Router) Address, and the primary and secondary DNS Server Addresses. Click Next.
Configuring LAN Settings
8Type a private IP address in the SonicWALL LAN IP Address field. The default private IP address is acceptable for most configurations. Type the subnet in the Subnet Mask field. The Enable Windows Networking Support checkbox is checked to allow Window networking support. If you do not want to allow Windows networking support, uncheck this setting. Click Next.
Configuring LAN DHCP Settings
9If you want to use the SonicWALL security appliance’s DHCP Server, check the Enable DHCP Server on LAN checkbox and enter a range of IP addresses to assign network devices in the LAN Address Range fields. The default entries work for most network configurations. Click Next.
Configuring WLAN 802.11b/g Settings
10The Service Set ID (SSID) identifies your wireless network. It can be up to 32 alphanumeric characters long and is
Configuring WiFiSec - VPN Client User Authentication
11WiFiSec and GroupVPN are automatically enabled on the security appliance using the default settings associated with each feature. To add a user with VPN Client privileges, type a user name and password in the User Name and Password fields, and confirm your password in the Confirm Password field. When users access the security appliance using the VPN client, they are prompted for a user name and password. Click Next.
Configuring Wireless Guest Services
12When Enable Wireless Guest Services is selected, guests on your WLAN are permitted access only to the WAN and are required to log in when accessing the Internet. Up to 10 users by default can use the same guest account. Type in the account name and password in the Account Name and Password fields. Configure the Account Lifetime and the Session Timeout times.
Configuration Summary
13The Configuration Summary page displays all of the settings configured using the Deployment Scenario Wizard. To change any of the settings, click Back until you see the settings you want to change. To use this configuration on the security appliance, click Apply.
Storing Configuration
14Wait for the settings to take effect on the security appliance.
Congratulations
15!When the settings are applied to the security appliance, the Congratulations page is displayed. Click Restart to complete the configuration.
SONICWALL SONICOS STANDARD 3.0 ADMINISTRATOR’S GUIDE | 19 |
