SELECTING A GOOD LOCATION
Please make sure to connect the power plug to the wall outlet socket after connecting the MFM to the power cord!
1.Install the base stand; place the MFM on a solid surface.
Min 1 m
Ensure that the MFM is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover.
To prevent any unsafe situations, flame sources, such as lighted candles, should not be placed on or in the vicinity.
Avoid heat, direct sunlight and exposure to rain or water.The equipment should not be exposed to dripping or splashing water.
2.Connect the antenna cable or CATV cable to the aerial socket TV ANTENNA at the back of the MFM.
3.Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V).
4.Power:
Insert the power cord in the wall socket with AC power supply.You can see LED states at the front panel. If the LED colour is Green, the MFM set power is on. If the LED colour is Red, the MFM set is in standby state.
5.Turn on the MFM:
Press the POWER key on the Remote control or the side panel control knobs on the monitor.The MFM will turn on in a minute with display on the screen.
Power Key
9
