iv.On the General tab, next to Startup type, make sure that Automatic is selected.

v.If the service is not already running, under Service status, click Start, and then click OK.

Windows XP

i.From the Windows Start menu, right click My Computer.

ii.Click Manage, and then click Services and Applications.

iii.Double-click Services, and then select Print Spooler.

iv.Right-click Print Spooler, and click Restart to restart the service.

b.Make sure the correct printer is set as the default printer.

The default printer has a check mark in a black or green circle next to it.

c.If the wrong printer is set as the default printer, right-click the correct printer and select Set as Default Printer.

d.Try using your printer again.

6.Restart the computer.

7.Clear the print queue.

To clear the print queue

a.Depending upon your operating system, do one of the following:

Windows 8: Point to or tap the upper-right corner of the screen to open the Charms bar, click the Settings icon, click or tap Control Panel, and then click or tap View devices and printers.

Windows 7: From the Windows Start menu, click Devices and Printers.

Windows Vista: From the Windows Start menu, click Control Panel, and then click Printers.

Windows XP: From the Windows Start menu, click Control Panel, and then click Printers and Faxes.

b.Double-click the icon for your printer to open the print queue.

c.On the Printer menu, click Cancel all documents or Purge Print Document, and then click Yes to confirm.

d.If there are still documents in the queue, restart the computer and try printing again after the computer has restarted.

e.Check the print queue again to make sure it is clear, and then try to print again.

If the above solutions do not resolve the problem, click here for more online troubleshooting.

ENWW

Unable to print 67