HP 4415S, 4515S, 4416S manual

3.If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the eight rubber screw covers (1) and the eight Phillips PM2.0×6.0 screws (2) that secure the display bezel to the display assembly. The rubber screw covers are available in the Rubber Kit, spare part number 535793-001.

4.Remove the bezel:

a.Flex the top of the bezel until it disengages from the display enclosure (1).

b.Flex the inside bottom of the bezel until it disengages from the display enclosure (2).

c.Flex the outside bottom of the bezel until it disengages from the display enclosure (3).

d.Lift the bottom corners of the bezel until they disengage from the display enclosure (4).

e.Lift the bezel at the seam in the hinges until it disengages from the display enclosure (5).

f.Remove the bezel from the display enclosure.

The display bezel is available using spare part number 536421-001 on computers with 15.6-in displays and a webcam and 536424-001 for computers with 15.6-in displays and no webcam.

80 Chapter 4 Removal and replacement procedures