Computer Setup in Linux, Starting Computer Setup

Computer Setup in Linux

Computer Setup is a preinstalled, ROM-based utility that can be used even when the operating system is not working or will not load.

NOTE: Some of the Computer Setup menu items listed in this guide may not be supported by your computer.

NOTE: Pointing devices are not supported in Computer Setup. You must use the keyboard to navigate and make selections.

NOTE: An external keyboard connected by USB can be used with Computer Setup only if USB legacy support is enabled.

To start Computer Setup, follow these steps:

1.Turn on or restart the computer.

2.Before your operating system opens and while the “F10=ROM Based Setup” message is displayed in the lower-left corner of the screen, press f10.

Computer Setup in Linux 117