HP 4416S, 4515S, 4415S manual Display assembly on computers with 14.0-in displays

Display assembly on computers with 14.0-in displays

NOTE: For information about removing the display from 15.6-in models, see Display assembly on computers with 15.6-in displays on page 78.

NOTE: The display assembly spare part kit includes two WLAN antenna transceivers and cables.

Description	Spare part number
For use only with black computers with 14.0-in HD displays
AntiGlare display assembly for use in computers not equipped with a webcam	536784-001
AntiGlare display assembly for use in computers equipped with a webcam	536785-001
BrightView display assembly for use in computers not equipped with a webcam	536786-001
BrightView display assembly for use in computers equipped with a webcam	536787-001
BrightView display assembly for use in computers equipped with a webcam and WWAN module	578366-001
For use only with red computers with 14.0-in HD displays
AntiGlare display assembly for use in computers not equipped with a webcam	572932-001
AntiGlare display assembly for use in computers equipped with a webcam	572933-001
BrightView display assembly for use in computers not equipped with a webcam	572934-001
BrightView display assembly for use in computers equipped with a webcam	572935-001

Before removing the 14.0-in display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 60).

5.Remove the following components:

a.Switch cover and keyboard (see Switch cover and keyboard on page 61)

b.Optical drive (see Optical drive on page 66)

c.Speakers (see Speakers on page 69)

d.Top cover (see Top cover on page 84)

e.Palm rest (see Palm rest on page 71)

Remove the 14.0-in display assembly:

1.Position the computer right-side up with the front toward you.

2.Open the computer as far as possible.

3.Remove the four Phillips PM2.5×4.5 screws (1) that secure the display assembly to the computer.

Component replacement procedures 91