HP 4515S, 4416S, 4415S manual

5.If it is necessary to replace the webcam module from the display enclosure, gently pull the webcam module away from the double-sided tape on the display enclosure (1), disconnect the webcam cable from the module (2), and then remove the webcam. The webcam module is available using spare part number 535797-001.

NOTE: To replace the webcam module in the display enclosure, align the holes on the webcam module with the pins on the display enclosure and press onto the double-sided tape.

6.If it is necessary to replace the display hinges:

a.Remove the display panel by removing the four Phillips PM2.5×4.5 screws (1) that secure the panel to the display enclosure.

b.Lift the panel from the enclosure (2).

c.Remove the eight Phillips PM2.0×3.0 screws (1) that secure the display hinges to the display panel.

Component replacement procedures 81