When replacing the system board, be sure that the following components are removed from the defective system board and installed on the replacement system board:

Memory module (see Memory module on page 65)

WLAN module (see WLAN module on page 76)

WWAN module (see WWAN module on page 70)

Modem module (see Modem module on page 97)

Processor (see Processor on page 104)

Remove the system board:

1.Position the computer right-side up with the front toward you.

2.Disconnect the following cables from the system board:

(1) Bluetooth module cable

(2) USB connector module cable

(3) RJ-45 cable

(4) SIM board cable

(5) Power cable

3.Lift the rear edge of the system board (1) until it rests at an angle.

Component replacement procedures 107