
Figure 3-22. Installing a Hard Drive Into a Drive Carrier
2
1
3
1 screws (4) | 2 | drive carrier | 3 | hard drive |
Back-Panel Module Cage Assembly (Service-Only Procedure)
Removing the Back-Panel Module Cage Assembly
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
1Press the system power switch to turn off the system. See "System Status Features" on page 10.
2Remove all of the server modules. See "Removing a Server Module" on page 73.
3Remove the power supply modules. See "Removing a Power Supply Module" on page 58.
4Remove the fan modules. See "Removing a Fan" on page 60.
5Remove the DRAC/MC module. See "Removing a DRAC/MC Module" on page 61.
92