4Align the connectors on the bottom of the daughter card with the connectors on the server module board, and then press down on the card edges until it is fully seated.
5Secure the daughter card to the server module board with the three screws.
6Close the server module. See "Closing the Server Module" on page 76.
7Install the server module. See "Installing a Server Module" on page 74.
Figure 3-17. Installing and Removing a Daughter Card
1 | 2 |
|
3
1 daughter card | 2 | screw holes (3) | 3 | daughter card connectors on |
|
|
|
| server module board (2) |
Removing a Daughter Card
CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. See your Product Information Guide for complete information about safety precautions, working inside the computer, and protecting against electrostatic discharge.
1Remove the server module. See "Removing a Server Module" on page 73.
2Open the server module. See "Opening the Server Module" on page 75.
Installing System Options
83
