Dell 1955 owner manual Exit Screen

Table 2-7. System Security Screen Options (continued)

Option	Description
Setup Password	Restricts access to the System Setup program in the same way that
	you restrict access to your system using the System Password
	feature.
	NOTE: See "Using the System Password" on page 51 for instructions
	on assigning a setup password and using or changing an existing
	setup password.
Password Status	Setting the Setup Password option to Enabled prevents the system
	password from being changed or disabled at start-up.
	To lock the system password, assign a setup password in the Setup
	Password option and then change the Password Status option to
	Locked. In this state, you cannot change the system password
	using the System Password option and the system password cannot
	be disabled at start-up by pressing <Ctrl><Enter>.
	To unlock the system password, enter the setup password in the
	Setup Password field and then change the Password Status option
	to Unlocked. In this state, you can disable the system password at
	start-up by pressing <Ctrl><Enter> and then change the
	password using the System Password option.
Power Button	Enables or disables the server module’s power button.
	• If you turn off the server module using the power button and you
	are using an ACPI-compliant operating system, the server module
	can perform an orderly shutdown before power is turned off.
	• If the server module is not running an ACPI-compliant operating
	system, power is turned off immediately after the power button is
	pressed.
	The button is enabled in the System Setup program. When
	disabled, the button can only turn on server module power.
AC Power Recovery	Determines how the server module reacts when power is restored.
(Last default)	If the option is set to Last, the server module returns to the last
	power state. On turns on the server module after power is restored.
	When set to Off, the server module remains off after power is
	restored.

Exit Screen

After you press <Esc> to exit the System Setup program, the Exit screen displays the following options:

•Save Changes and Exit

•Discard Changes and Exit

•Return to Setup

50

Using the System Setup Program