Installing System Options 59
Figure 3-1. Removing and Installing a Power Supply Module

Installing a Power Supply Module

1
Ensure that the power-supply module handle is fully down and then slide the power
supply module into the chassis until it is fully seated. See Figure3-1.
2
Rotate the power-supply module handle upward until its release tab snaps securely into
place.
3
Plug a power cable into the power supply module.
Fan Modules
Your system contains up to four system fans (two sets of redundant fans) contained in two
hot-pluggable fan modules. Each fan module has system fan indicators on its back panel
that identify the status of each of its system fans. See Figure1-7.
2
1
3
1 handle 2 release tab 3 power supply module