
Figure 3-3. Removing and Installing a System Fan
1 | 2 | 3 |
|
|
4
5
1 | fan module | 2 | fan 2 | 3 | fan 1 |
4 | fan lever | 5 |
|
|
|
Installing a Fan
1Orient the replacement fan as shown in Figure
2Install the fan:
a Slide the fan into the fan module. b Lower its fan lever.
c Press the bottom of the lever until it snaps securely into place.
3Slide the fan module into the chassis until it is fully seated. See Figure
4Rotate the
DRAC/MC Module
Among other controlling features, the DRAC/MC controls power to the system. When a functional DRAC/MC module is not installed,
Removing a DRAC/MC Module
1Disconnect any cables attached to the DRAC/MC module.
2Press in the bottom of the release tab and pull out the release lever. See Figure
3Slide the DRAC/MC module out of the chassis.
Installing System Options
61