Figure 3-25. Removing and Installing the Server Module Control Panel Assembly
1
7
2
| 6 |
|
|
|
|
|
|
| 5 |
|
|
|
|
| 4 |
|
|
|
|
| 3 |
|
|
1 | screws (2) | 2 | control panel cable retaining | 3 | retaining clip |
|
|
| clip |
|
|
4 | server | 5 | control panel cable | 6 | top bracket |
| connector |
|
|
|
|
7 | control panel |
|
|
|
|
Installing the Server Module Control Panel
1Place the new control panel under the server module top bracket and secure it with the two screws. See Figure
2Route the
3Connect the
b Slip the cable between the retaining clip and the connector and press down on the clip to secure the cable.
NOTE: The cable attaches to the connector on the control panel in the same manner.
4Close the server module. See "Closing the Server Module" on page 76.
5Install the server module. See "Installing a Server Module" on page 74.
Installing System Options
97