Dell 1955 Entering the BMC Setup Module, BMC Setup Module Options

Using the System Setup Program 55
For additional information on using BMC, see the documentation for the BMC and systems management
applications.
Entering the BMC Setup Module
1 Turn on or restart your system.
2 Press < Ctrl-E > when prompted after POST.
If your operating system begins to load before you press <
Crtl-E >, allow the system to finish
booting, and then restart your system and try again.
BMC Setup Module Options
For information about the BMC Setup Module options and how to configure the emergency management
port (EMP), see the
BMC User’s Guide .