Display assembly
NOTE: All display assembly spare part kits include 2 WLAN antenna transceivers and cables.
Description | Spare part number |
|
|
|
|
|
|
|
|
|
|
Before removing the display assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 41).
5.Remove the following components:
a.Switch cover (see Switch cover and keyboard on page 42)
b.Keyboard (see Switch cover and keyboard on page 42)
c.Speakers (see Speakers on page 49)
d.Palm rest (see Palm rest on page 50)
Remove the display cable:
1.Turn the computer
2.Open the computer as far as possible.
3.Disconnect the display panel cable (1) from the system board.
4.Disconnect the camera and microphone module cables (2) from the system board, and then remove the cables from the routing path (3).
Component replacement procedures 59
