HP 4710S manual Computer Setup menus, File menu

Restoring factory settings in Computer Setup

To return all settings in Computer Setup to the values that were set at the factory, follow these steps:

1.Open Computer Setup by turning on or restarting the computer, and then pressing f10 while the "F10 = ROM Based Setup" message is displayed in the lower-left corner of the screen.

2.Use the arrow keys to select File > Restore Defaults, and then press enter.

3.When the confirmation dialog box opens, press f10.

4.To save your preferences and exit Computer Setup, use the arrow keys to select File > Save Changes And Exit. Then follow the instructions on the screen.

NOTE: Your password settings and security settings are not changed when you restore the factory settings.

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.

NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer.

File menu

Select	To do this
System information	● View identification information for the computer.
	● View specification information for the processor, cache
	and memory size, and system ROM.
Restore Defaults	Replace the configuration settings in Computer Setup with the
	original factory settings. (Password settings and security
	settings are not changed when you restore the factory
	settings.)
Ignore Changes And Exit	Cancel any changes entered during the current session. Then
	exit and restart the computer.
Save Changes And Exit	Save any changes entered during the current session. Then
	exit and restart the computer. Your changes go into effect
	when the computer restarts.

Security menu

Select	To do this
Setup Password	Enter, change, or delete a setup password.
Power-On Password	Enter, change, or delete a power-on password.
Password Options	●	Enable/disable stringent security.
	●	Enable/disable stringent security.

90 Chapter 5 Computer Setup