HP 4710S manual USB port to the computer

Boot options	●	Set an f9, f10, and f12 delay when starting up.
	● Enable/disable CD-ROM boot.
	●	Enable/disable floppy boot.
	● Enable/disable internal network adapter boot.
	● Enable/disable MultiBoot, which sets a boot order that
		can include most boot devices in the system.
	● Set the Express Boot Popup delay in seconds.
	● Set the boot order.
		◦	1st boot device: USB CD-ROM
		◦	2nd boot device: USB floppy
		◦	3rd boot device: USB SuperDisk
		◦	4th boot device: Notebook hard drive
		◦	5th boot device: USB hard disk
		◦	6th boot device: Network controller
Device Configurations	●	Swap the functions of the fn key and left ctrl key.
	● Enable/disable USB legacy support. When enabled, USB
		legacy support allows the following:
		◦	Use of a USB keyboard in Computer Setup even
			when a your operating system is not running.
		◦	Startup from bootable USB devices, including a hard
			drive, diskette drive, or optical drive connected by a
			USB port to the computer.

● Enable/disable BIOS DMA data transfers.

● Enable/disable fan always on while connected to an AC outlet.

● Enable/disable data execution prevention. ● Enable/disable LAN power saving mode. ● Enable/disable SATA Native Mode.

● Enable/disable Dual Core CPU.

● Enable/disable HDD translation mode.

92 Chapter 5 Computer Setup