8.If it is necessary to replace the display hinges, remove the four Phillips PM2.5×5.0 screws (1) that secure the display panel to the display enclosure.
9.Remove the display panel (2).
10.Remove the four Phillips PM2.0×3.0 screws (1) that secure each display hinge to the display panel.
NOTE: When removing or replacing the eight Phillips screws, be sure to remove or replace them in the same sequence as the numbering found on the display hinges (1, 2, 3, 4).
11.Remove the display hinges (2). The left and right display hinges are available in the Bracket Kit, spare part number
12.If it is necessary to replace the wireless antenna cables, lift the tape (1) that secures the cables to the display enclosure. The wireless antenna cables are included in the Display Cable Kit, spare part number
13.Remove the wireless antennas (2).
62 Chapter 4 Removal and replacement procedures
