Removal and replacement procedures
25.If it is necessary to replace the webcam/microphone module, lift the webcam/microphone module 1 as far from the display enclosure as the webcam/microphone module allows.
26.Disconnect the webcam/microphone module cable 2 from the webcam/microphone module.
27.Remove the webcam/microphone module. The webcam/microphone module is available using spare part number
28.If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws 1 that secure the display panel to the display enclosure.
29.Remove the display panel 2. The display panel is available using the following spare part numbers:
❏
❏
Maintenance and Service Guide |